Ezrun MAX10 ESC (2-3S)

• (1) Ezrun MAX10 ESC
• (3) 14 AWG, 200C Black wires for a brushless motor 
• (1) Double side tape 
• (2) Heat shrink tube
• User's manual 
• A HOBBYWING decal 

Features

• ESC is compatible with both sensorless and sensored brushless motors (only in sensorless mode).
• Fully waterproof design for all conditions.
• Super internal switch-mode BEC with switchable voltage of 6V/7.4V for usage with high torque and high voltage servos.
• Motor Thermal Protection: It will be available after you plug the temperature monitoring cable on the ESC into the temperature monitoring port (marked with “TEMP”) at the bottom of the matching HOBBYWING motor.
• Highly reliable electronic switch design prevent mechanical switch failure due to dirt, water, dust and etc.
• Proportional brake with 9 levels of maximum brake force and drag brake force.
• 5 levels of acceleration/punch from soft to aggressive for different vehicles, tires and tracks.
• Capacitor Protection:Innovative Capacitor Protection effectively protects capacitors from exploding and causing irreversible damage to the ESC from overloading. • Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail safe (throttle signal loss protection).
• Single-button ESC programming and factory reset.
• Advanced programming via portable LED program card, multifunction LCD program box or OTA.
• Firmware upgrade via HOBBYWING multifunction LCD program box or WiFi module (item sold separately).

++ Important notes +++
"Minimum 70C suggested, lower C rating may be okay, however it will not provide the intended experience. Also, How Power Plugs must be used. The surface area of your plugs, must be "larger" than the wires installed or you will very likely have problems. TRX, "T Plug", EC plugs, and "Deans" are not suggested for today's upgraded electronics setups."

Specification